Zebra 10/100 Technical Information download pdf (Page 59)

Getting Started

Setting up a ZebraNet Connect IP

ZebraNet 10/100 Print Server User and Reference Guide 37

You enter into the Add ZebraNet Connect Port screen, where there is a list of all

10⁄100 PS devices available on the local subnet.

• The TCP/IP monitor searches only the local subnet.

6 If the port you want to add is listed in the Ports Available on Local Subnet window,

select the port name. If the port you want to use is not listed, you can:

• Select Cancel and repeat step 5 to rediscover the print servers.

• In ZebraNet Connect, click the Locate Non-local Device button and enter the

static TCP/IP Address used for the 10⁄100 PS.

7 Click Add.

8 To close the Printer Ports dialog, click Cancel.

9 To save the configuration, click OK.

Now you can use ZebraNet Connect. Whenever you print to the Windows printer

configured with ZebraNet Connect, your print job will go directly to the ZebraNet

10⁄100 PS port.

:LQGRZV0H

7RVHWXSD10⁄100 PSSRUWXVLQJ:LQGRZV:LQGRZV0H

FRPSOHWHWKHVHVWHSV

1 From the task bar, select Start>Settings>Printers.

2 Select the Windows printer that you want to print with ZebraNet Connect IP.

3 From the file menu, select File>Properties.

4 To add a ZebraNet Connect IP port, in the Details tab select Add Port.

5 From the Add Port dialog, select Other, then select the ZebraNet Connect Monitor

as the type of port to add.

Note • The ZebraNet Connect for TCP/IP DHCP discovery feature relocates a

10⁄100 PS device on the local subnet by its port name, even if the IP address

changes. This feature is enabled on the local subnet only. A non-local 10⁄100 PS

device is not rediscovered if the IP address changes.

Note • Under Windows 95, you have to set up the printer for a local port first, then

open Properties from the File menu and continue with the configurations.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 165 166

No comments

Zebra 10/100 Technical Information Page 59