94 ZebraNet 10/100 Print Server User and Reference Guide
10/100 Print Server
10/100 PS Features
36)HDWXUHV
This section covers features available for the 10⁄100 PS only, not the printer’s
features. Some of the features you access in this section prompt you to enter the
default user ID and password, as follows:
• User ID: admin
• Password: 1234
The options on the Print Server page vary. ZPL and EPL printers print server settings
vary slightly.
6WDWXVDQG&RQILJXUDWLRQ
The steps that follow are based on the navigation of a ZPL printer using firmware X.10
or higher.
7RDFFHVVWKHSULQWVHUYHUVHWWLQJVFRPSOHWHWKHVHVWHSV
1 Open a Web browser.
2 In the Address text-box, type your printer’s IP address, and press Enter.
Note • The difference between ZPL and EPL is this:
ZPL — If you have a ZPL printer with x.10 or later firmware, you are
prompted to the Printer Home page. From there, you select
Print Server Settings.
If you have a ZPL printer with firmware earlier than x.10, you are initially
taken to the Print Server home page
EPL — If you have an EPL printer, you are immediately prompted to the Print
Server page.
Important • You can upgrade your firmware by visiting our Web site:
http://www.zebra.com
Comments to this Manuals