Zebra KR203 Specifications download pdf (Page 73)

10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B

Troubleshooting

Status Light Descriptions

Application LED States

Immediately after power is applied to the printer, a brief self test is performed and the

status light will report the following conditions:

Table 7-1 • Application LED States

Solid Green 0 - OK This code is reported when no other

codes are active. It indicates the

printer is functioning normally.

One Red Flash 1 - Paper Jam in

Presenter

This code indicates that media is stuck

in the presenter. This error is set when

the printer attempts to eject the media

but cannot complete the operation.

This error is cleared by removing the

media from the presenter sensor.

Two Red Flashes 2 - Cutter Jam This code indicates that the printer

could not find the cutter blade or could

not properly manage its position. The

error is set when the printer attempts

to cut but fails after three retries. This

error is cleared by cycling the power

off and on.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 79 80

No comments

Zebra KR203 Specifications Page 73