Zebra KR203 Specifications download pdf (Page 41)

Media

Media Guide

10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B

3. Insert the media guide under the printhead. Insert the T-shaped tab of the media guide

into the “T”-slot, slide it forward, and fasten the screw.

4. Close the printhead.

Media Guide Calibration

When the media guide is changed, the printer will signal media present even when none

is. You must instruct the printer to detect the sensor it should use again. This is

accomplished with the two flash function (see Table 7-2, Feed Button User Interface on

page 69).

This process must be done without media in the printer. If the process is attempted with

media in the printer an error will occur. Upon successful detection of the guide, guide

settings are stored.

Figure 5-5 • Media Guide Installation

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 79 80

No comments

Zebra KR203 Specifications Page 41