Zebra KR203 Specifications download pdf (Page 63)

Accessories

Printer Power Supply – 808099-004

10/26/2010 KR203 Hardware Integrator Guide P1028247-001 Rev. B

Printer Power Supply – 808099-004

The KR203 power Supply accessory can easily be incorporated into a kiosk design. The

power supply is easily attached to the kiosk with tie wraps.

The power supply has been tested to work with the KR203 printer and complies with all of

the same safety and compliance regulations and has the following specifications:

• Output voltage: 24 VDC

• 70 Watts, 90-264 VAC at 47-63 Hz

• Peak Power 243 Watts

• Input Current: 2.92 Amp max.

• Inrush Current: 40 Amp max.115 VAC or 80 Amp max.230 VAC

Attaching the Power Supply

1. Insert the 24 VDC power supply’s power connector into the printer’s power receptacle.

Verify the power plug’s latch has locked to the connector by giving it a slow gentle pull.

2. Insert the AC power cord into the power supply. Plug the other end of the cord into an

appropriate AC electrical outlet. The active power light will go on if power is on at the

AC outlet.

The DC power filter and cable

length is a minimum of 174 mm

EMI Power Filter

Power ON LED

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 79 80

No comments

Zebra KR203 Specifications Page 63