Zebra KR203 Specifications download pdf (Page 48)

Media

Clearing Paper Jams

P1028247-001 Rev. B KR203 Hardware Integrator Guide 10/26/2010

Clearing Paper Jams

Should a paper jam occur, follow the procedure below:

Clearing the printhead:

Caution • The printhead becomes hot while printing. To protect from damaging the

printhead and risk of personal injury, avoid touching the printhead.

Caution • Always disable printer power by un-plugging the printer from the kiosk power

supply or turning off the printer and/or kiosk power.

1. Carefully cut the media at the rear of the printer.

2. Open the printhead (see "Opening the Printhead" on page 13).

3. Remove and discard the damaged media.

4. Close the printhead and reload the media using the Automated Media Loading

method (page 40).

Clearing the Presenter:

1. Open the presenter (see "Opening the Presenter" on page 13).

2. Remove and discard the damaged media.

3. Close the presenter securely.

Printing a Test Receipt

Before you connect the printer to your computer, make sure that the printer is in

proper working order.

You can do this by printing a test receipt.

1. Make sure the media is properly loaded and ready with the printhead closed. Then,

turn the printer power on if you have not already done so.

2. Press the feed button to feed, cut, and present media. Repeat two to three times to

allow the printer to properly calibrate the printer for the installed media. The printer

may feed several extra receipts during this process if media calibration needs to be

adjusted (this is an automatic printer feature).

3. When the status light is solid green, press and hold the feed button until the status

light flashes once.

4. Release the feed button. A printer self test will print.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 79 80

No comments

Zebra KR203 Specifications Page 48