Zebra Printer 8 User Manual download pdf (Page 191)

B: Setting Custom Card Specifications

P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 187

Irregular Warpage

Warpage is usually caused by too much energy being transferred to the card, i.e. the

temperatures are too hot or the speeds are too slow.

Step 1. Decrease Front Transfer Temperature:

a. Go to the Card Specifications window; see Section B.3.

b. Make a note of the default front transfer temperature settings.

c. Decrease the appropriate (single or double side) front transfer temperature by 5.

d. Click on the OK button.

e. Print a test card; see Section B.3.

f. Examine the test card.

• If there is noticeable improvement, continue decreasing the front transfer

temperature by 5, printing a test card, and examining the resulting card. Stop

when the problem is corrected or there is no more improvement. If the

problem is corrected, no more adjustment is required; otherwise go to Step 2.

• If there is no noticeable improvement, return the temperature to its default

setting; and go to Step 2.

Note • Irregular warpage is more common with Smart Cards.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 225 226

No comments

Zebra Printer 8 User Manual Page 191