Zebra Printer 8 User Manual download pdf (Page 144)

140 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002

6: Cleaning

Cleaning the Printhead

Printhead cleaning removes deposits when print anomalies persist. To avoid deposits, only use

foam-tipped swabs or pens.

Step 1. Place the printer power switch in the OFF ( ) position.

Step 2. Open the Door, and remove the print ribbon.

Step 3. Bend the Cleaning Swab to release the cleaning fluid.

Step 4. Clean Printhead by moving Cleaning Swab tip side-to-side across the Printhead

elements. Only use moderate force. To re-order Cleaning Swabs, see the Media List

on the User Documentation and Drivers CD supplied with this printer.

Step 5. Reinstall the print ribbon, and close the Door.

Step 6. Place the printer power switch in the ON ( ) position.

Caution • Never use a sharp object or any abrasive to scrape deposits from the

Printhead. Permanent damage to the Printhead will result.

Caution • Do not touch the Printhead if the printer has been in service in the last

10 minutes. It could be very hot and cause a burn.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 225 226

No comments

Zebra Printer 8 User Manual Page 144