Zebra Printer 8 User Manual download pdf (Page 101)

4: Printer Settings and Adjustments

Printing Preferences

P1045430-002 Zebra ZXP Series 8 Card Printer User’s Manual 97

Monochrome Conversion

The monochrome panels in the ribbon can only print binary (pure on or off) images.

Monochrome conversion is used to convert continuous tone 8-bit-per-pixel RGB or gray

image content into binary1-bit-per-pixel content.

• Color Image

The sample image to the right is the original color image used

to make the following monochrome conversions.

• Dither error diffusion (default)

Error diffusion is used primarily where you have a full color

(RGB image with 8 bits per pixel) or full gray (single color but

still 8 bits per pixel) that you need to print with binary printing

(can only print full-on or full-off; i.e., 1 bit per pixel).

Typically preferred over halftoning for most images.

• Dither 6x6 halftoning and Dither 8x8 halftoning

To simulate gray in graphics, halftones are printed. Halftones

are arrays of dots arranged in a grid (e.g., 6x6 or 8x8) to

represent each image pixel as a shade of gray. For dark gray,

more grid dots are black. For light gray, more grid dots are

white As the grid size goes up so does the number of possible

output levels, 6x6 cell has 36 possible output levels while 8x8

has 64. But as cell size increases, there is a corresponding

decrease in resolution.

• Dither pure black on white

This is the simplest method for converting from 8 bits per pixel

to 1 bit per pixel.

For example, the input pixel can be a value from 0 to 255. If

the threshold is 128, any pixel over 128 becomes full on (1);

and any pixel that is less than 128 becomes full off (0). This

mode works best for text, barcodes, line art, logos --

everything except continuous-tone pictures.

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 225 226

No comments

Zebra Printer 8 User Manual Page 101