Zebra Printer 8 User Manual Page 148
- Page / 226
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
144 Zebra ZXP Series 8 Card Printer User’s Manual P1045430-002
7: Troubleshooting
OCP Error Messages
OCP Error Messages
CODE MESSAGE POSSIBLE CAUSE POSSIBLE SOLUTION
1
SYSTEM NOT READY A problem was detected during printer
start-up.
Power cycle the printer, and retry.
2 - 4
SYSTEM ERROR Internal logic error. Power cycle the printer, and retry.
5
FW UPGRADE ERROR Firmware upgrade incompatibility. Verify the version, and retry installing the
firmware.
6
DIAGNOSTIC ERROR Error encountered in Diagnostic Mode. Power cycle the printer, and retry.
7
FW UPGRADE ERROR Firmware upgrade failed. Verify the version, and retry installing the
firmware.
8
CRITICAL ERROR
SHUTTING DOWN
Major malfunction encountered. Contact Zebra Technical Support.
3001
PRINTER OFFLINE Status toggled (offline/online) via the OCP
Advanced Settings Menu.
Change status to online via the OCP
Advanced Settings Menu.
4001
OUT OF CARDS • The Feeder Cartridge is empty.
• Card is stuck in Feeder Cartridge.
a. Load cards in the Feeder Cartridge.
b. Re-seat the Feeder Cartridge.
4002
INVALID CARD TYPE Encoding error. a. Ensure that you are using the correct
card type.
b. In the Encoding tab of the driver
Printing Preferences, check that the
settings are correct for the cards you
are using.
c. Ensure that the data conforms to
ISO Specifications.
d. Retry writing and reading.
4003
CARD JAM Card is jammed in the Printer Clear the card path.
4010
OUT OF FILM The transfer film has run out. Load new roll of transfer film.
4011
INVALID FILM Transfer film does not match the printer. a. Verify the part number of the transfer
film is correct on OCP.
b. Power cycle the printer.
4012
FILM JAM The transfer film is jammed. a. Check the transfer film.
b. Reinstall the transfer film.
c. Repair the break in the transfer film
and reinstall.
4013
FILM MOTION ERROR Transfer film not correctly responding to
motion commands.
a. Check the transfer film.
b. Reinstall the transfer film.
c. Power cycle the printer.
4014
CARD FEED ERROR Card is jammed in Feeder Cartridge. a. Clear card jam in Feeder Cartridge,
and re-seat Feeder Cartridge.
b. Ensure that cards are not stuck
together and that they are the correct
thickness (10 to 50 mil).
4015
CARD NOT INSERTED Card was not fed into the Single Card
Feed Slot within 30-second period.
Retry and feed card into the Single Card
Feed Slot, or cancel the operation.
4016
OUT OF CARDS • The Feeder Cartridge is empty.
• Card is stuck in Feeder Cartridge.
a. Load cards in the Feeder Cartridge.
b. Re-seat the Feeder Cartridge.
4017
INVALID FILM Transfer film does not match the printer. a. Verify the part number of the transfer
film is correct on OCP.
b. Power cycle the printer.
5001
OUT OF RIBBON Print ribbon has run out. Load a new roll of print ribbon.
- ZXP Series 8 1
- Card Printer 1
- User’s Manual 1
- Copyright Notice 2
- Trademarks 2
- Product Disposal 2
- Contents 3
- Introduction 5
- Printer Components 6
- Laminator Components 7
- 1: Introduction 8
- Zebra Supplies 9
- Installation and Setup 11
- Unpacking the Printer 12
- 2: Installation and Setup 13
- Printer with a Laminator 14
- Installing the Card Hoppers 16
- Loading Cards 17
- Opening the Printer Door 18
- Loading the Transfer Film 21
- Loading a Print Ribbon 23
- Loading the Laminate 25
- Laminate Cassette shown.) 27
- 0 - 0.5 mm 30
- 0 - 1/32" 30
- Step 6. Install the cassette 34
- Using Partial-Width Laminate 35
- Connecting Power 37
- USB Connection 38
- 10/100base- T 39
- 10/100base-T 39
- OK button 41
- Next button 42
- Operation 53
- Card Type Selection 54
- Printing a Test Card 55
- Manual Card Feed 56
- Output Hopper 57
- ZXP Series 8 58
- INFO CANCELMENU 58
- Operational 59
- Warning Messages 60
- Error Messages 60
- Printer Menu Information 61
- Main Menu 62
- Print Test Cards Menu 63
- Network Settings Menu 64
- Advanced Settings Menu 65
- Clean Printer Menu 66
- Wireless Settings Menu 67
- Ethernet Indicators -- Detail 68
- Printer Settings and 69
- Adjustments 69
- Printer Properties 70
- General Tab 71
- Sharing Tab 72
- Ports Tab 73
- Advanced Tab 74
- Color Management Tab 75
- Devices Tab 76
- All Profiles Tab 77
- Security Tab 79
- Device Information Tab 80
- Media Info 81
- Card Setup Tab 83
- Black Panel Options 86
- Technologies 87
- Area manager: 89
- Uv Panel Option 92
- Disable Uv 94
- Bitmap based Uv Print 94
- Uv image area extraction 95
- Security ID 96
- Inhibit Option 97
- Encoding Tab 99
- Printing Preferences 100
- Monochrome Conversion 101
- Color (YMC) Optimization Tab 103
- About Tab 104
- ZXP Series 105
- ZXP Series Toolbox Access 106
- Information 107
- Printer Sensors 108
- 5: ZXP Series Toolbox 109
- Laminator 110
- Wired Network 111
- Wireless Network 112
- Configuration 113
- MM/DD/YYYY format 114
- Save/Restore 115
- Firmware and Lookup Tables 116
- Wireless Settings 118
- Printer Settings 119
- Y offset 121
- Y offset 121
- Cleaning 122
- Clean Laminator 124
- Print Test Card 126
- Technology 127
- Smart Card 129
- Advanced Security 131
- Security Roles 133
- Print Viewer 134
- Cleaning the Rollers 136
- Cleaning the Platen 138
- Cleaning the Laminator 139
- 6: Cleaning 140
- Cleaning the Printhead 144
- Card Cleaning Cartridge 145
- Cleaning Roller 145
- Troubleshooting 147
- OCP Error Messages 148
- 7: Troubleshooting 149
- OCP Test Card Images 155
- Test Card Descriptions 156
- Ethernet Issues 157
- Technical Specifications 159
- Specifications 160
- Card Compatibility 161
- Agency Approvals 161
- Electrical 162
- Physical 162
- Environmental 162
- Declarations of Conformity 163
- Industry Canada Notice 164
- Japanese Notification 164
- Chinese Notification 164
- Proprietary Statements 165
- Radio Regulatory Information 166
- 8: Technical Specifications 167
- APPENDIX A 169
- Part Numbers 170
- Appendix B 171
- B.2 Process Flowchart 172
- B.3 3-Step Process 173
- Step 2: Make adjustments 174
- B.4 Adjustments 176
- B.4.1 Adjustment Overview 177
- B.4.2 Partial Transfer 179
- Back of card 182
- B.4.3 Warpage 185
- Edges curled up 188
- Irregular Warpage 191
- Appendix C 195
- Adding a Network Printer 196
- C: Network Operations 197
- Printer Pooling 200
- Using the Printer Pool 201
- Printer Sharing 202
- Appendix D 203
- Installing the Printer 204
- Configuring the Printer 204
- Appendix E 205
- Driver Setting 206
- Media Loading Orientation 207
- Magnetic Encoder Cleaning 207
- Magnetic Encoding Type 208
- E: Magnetic Card Encoder 209
- Encoder Macro Commands 210
- APPENDIX F 211
- Contact Smart Cards 213
- F: Smart Card Options 214
- Contactless Smart Cards 215
- Appendix G 217
- Appendix H 219
- APPENDIX I 223
- T: +44 (0) 1628 556 025 224
- F: +44 (0) 1628 556 001 224
- E: [email protected] 224
- Language Phone Email 224
- T: + 44 (0) 177 2 69 3069 225
- E: [email protected] 225
- Zebra Website 226
Related products and manuals for Plastic card printers Zebra Printer 8
Plastic card printers Zebra P420 User Manual
(54 pages)
(54 pages)
Plastic card printers Zebra P520 User Manual
(57 pages)
(57 pages)
Plastic card printers Zebra P310 User Manual
(46 pages)
(46 pages)
© 2020, manymanuals.com. All rights reserved. | 0.276 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals