Zebra TTPM2 Specifications Page 89

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 88
89
Document Stock
Ticket Dimensions and Perforation
03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001
Tickets With 45° Cut Corners
Some applications are using tickets with cut corners without radius. These tickets are not
within the specifications for use in the TTPM2 printer series. The effect will be that the ticket
detection point moves about 1.3 mm, not only causing incorrect cut but also erroneous
placement of the magnetic code.
The coding starts 1.3 mm too early resulting in synchronization zeroes being lost in the
beginning of the ticket. On units configured for center track, the ticket should be readable in
both directions. If synchronization is lost, the tickets will be readable if inserted one way, but
not the other way around.
A solution to this problem is using HEX code for the magnetic message instead of ISO code.
Thus you can compensate for the lost synchronization zeroes by adding additional
synchronization zeroes in the beginning of the message. However, note that HEX encoded
tickets are normally not readable in standard ISO-card readers.
Figure 30 • Ticket position is erroneously detected with 45° corners
Page view 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 101 102

Comments to this Manuals

No comments