Zebra TTPM2 Specifications download pdf (Page 29)

Command Set

Printing and Encoding Capability Overview

03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001

The following is a simple example:

Additional Commands

In addition to the command that specifies the print, there are a number of other commands

used for functions such as:

• Clearing of the TTPM2 buffer

• Selection of document entry

• Decoding of documents

• Generation of status requests

All applicable commands are listed in the following pages. Detailed descriptions of the

software commands are given with syntax explanations as well as commented examples.

Ticket Memory

The TTPM2 printer has 128k of nonvolatile RAM (lithium battery backup, with

approximately 7 years battery life). This memory stores the entire ticket so you can continue

after power OFF, without having to reload the data.

The ticket printing area is 384x512 pixels for an 86 mm ticket, and 384x656 pixels for a

110mm ticket.

Initialization After Power OFF

To initialize the printer after power ON you just send a print command (!P) and the printer is

ready for use.

If you want to clear the memory and start a new ticket you have to send the clear all command

!C.

Sent to printer Acknowledgement

!C 06h 04h

!CA 06h 04h

!F T E 309 014 10 03 02 1 "TEST TICKET WITH FULL" 06h 05h

!F T E 259 024 10 03 02 1 "75 BPI TRACK 2 STRING" 06h 05h

!M1234567890123456789012345678901234567 06h 80h

!P 06h 02h

Note • Make sure not to print data outside this area when you use the !F command.

If you do, you write in parts of the memory that are used for other functions in the printer,

and the result is totally unpredictable.

Note • The first !P after power ON initializes the printer. No ticket is produced.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 101 102

No comments

Zebra TTPM2 Specifications Page 29