Zebra TTPM2 Specifications download pdf (Page 59)

03/05/2009 TTPM2™ Installation and Programming Manual P1003645-001

TTPM2 Start-Up

The TTPM2 has battery backed-up memory. All print field definitions are retained even when

the printer power is switched OFF.

Power Failure Cleanup

At power ON, the TTPM2 tries to find out if a ticket is in the ticket path at any other location

than at the top of form position. If it finds a ticket, it destroys the magnetic encoding, prints

VOID on it and outputs the ticket. If the printer is equipped with a front load 2 or 3 unit, the

ticket is redirected to the waste bin.

Start-Up Synchronization

To enable the TTPM2 to synchronize itself to the incoming data after power up, either after a

usual power ON, or after a power failure, the printer has to receive either a !C command that it

will execute, or a !P command that it will ignore.

Using the !C command to initiate the TTPM2 clears all data that has previously been stored.

To avoid having data cleared, the !P command can be used, for example, to retain document

data stored in the TTPM2 prior to a power failure or power OFF.

8. This feature was introduced in firmware 1660-xxx version 3.30, and in version 4.11 for other firmware.

Note • Please remember that the TTPM2 has to receive either the !C or !P command, or both,

after power up. All other commands and data will be ignored.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 101 102

No comments

Zebra TTPM2 Specifications Page 59