Zebra CPCL Specifications download pdf (Page 44)

Device Manager

Configuration Settings

P1014152-002 Rev. A ZPL & CPCL Printer Driver for OPOS Application Programmer’s Guide 06/13/2011

Output Logging

The Driver can log its printer command output for troubleshooting purposes. By default, this

option is not turned on to keep the logs from consuming disk space. In the event that the

Output Logs are needed, the feature can be activated from within the Device Manager.

To turn on Output Logging, perform the following:

1. Run the Device Manager and select the printer to be monitored.

2. Click on the Configuration Settings tab and check Enable Audit Log.

The logs can be found at C:\Program Files\Zebra Technologies\ZebraOPOS\LOGS.

There are two logs:

• ZebraPOS_Audit.txt - contains a running log of the OPOS commands used and the

resulting driver output.

• ZebraPOS_Status_Audit.txt - contains a running log of when status queries were sent.

To turn off the logging, perform the following:

1. Uncheck the Enable Audit Log box in the Device Manager.

Note • If logging is turned off or on while a printer is in the "Claimed" state, the setting

change will not take effect until the printer has been "Released".

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 69 70

No comments

Zebra CPCL Specifications Page 44