Zebra 3742 Service Manual download pdf (Page 49)

Latch, Left Replacement 980357-218A

Assembly

1. Turn the shaft " so that the flat of the end faces upward.

2. Align the latch 3 so that the flat side of its mounting bearing matches the flat side of the shaft;

then, press the latch onto the shaft.

3. The latch aligns with a stripper cam

# that can be found between the side frame $ and

roller

4. Use retainer pliers to place a new retaining ring 2 onto the shaft to secure the latch.

5. Use pliers to push the return spring

! into its slot.

6. Ensure the stripper spring

& is correctly mounted.

Assembling the Printer

1. Follow the assembly steps of the Printer Mechanism Replacement procedure (980357-212).

2. Follow the assembly steps of the Media Frame Replacement procedure (980357-207).

3. Check the installation. Turn on the printer and run the AutoSense routine to get a dump

mode printout. This action tests the printer's media drive and printing capabilities.

980357-001 Rev. A 41

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 55 56

No comments

Zebra 3742 Service Manual Page 49