Zebra 3742 Service Manual download pdf (Page 31)

Front Bezel, Cutter Replacement 980357-206A

Preparations

Protect against static discharge. Your work area must be static-safe and include

a properly grounded conductive cushioned mat to hold the printer and a

conductive wrist strap for yourself.

Removal

1. Pull the bezel 1 forward and away from the bottom case !.

2. If necessary, provide outward lateral pressure on the sidewalls of the bottom case.

3. Unplug the cutter's ribbon cable 2 from where it connects to the main PCBA.

Assembly

1. Plug in the cutter's ribbon cable into its

connector on the main PCBA.

2. Press the bezel onto the bottom case

until it snaps into place.

Check the Installation

Reload media and ribbon, if necessary.

Plug in the power cord, turn on the printer

and run the AutoSense routine to get a dump

mode printout. This action tests the printer's

media drive and printing capabilities.

980357-001 Rev. A 23

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

No comments

Zebra 3742 Service Manual Page 31