Zebra 3742 Service Manual download pdf (Page 47)

Platen Motor Replacement 980357-217A

Preparations

1. Do the removal steps of the Media FrameReplacement procedure (980357-207).

2. Do the removal steps of the Print Mechanism Replacement procedure (980357-212).

Removal

Use a #1 Phillips driver to remove the two

screws 34 that secure the motor shield 2

and platen motor 1 to the left side frame

Assembly

1. Align the motor and shield together so

that the wire bundle leads off to the rear

of the mechanism and place against the

left side frame.

2. Replace the two screws that hold the

motor and shield in place and use a #1

Phillips driver to tighten them.

Assembling the Printer

1. Follow the assembly steps of the Printer

Mechanism Replacement procedure

(980357-212).

2. Follow the assembly steps of the Media

Frame Replacement procedure

(980357-207).

3. Check the installation. Turn on the

printer and run the AutoSense routine

to get a dump mode printout. This

action tests the printer's media drive and

printing capabilities.

980357-001 Rev. A 39

MOVIE

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 55 56

No comments

Zebra 3742 Service Manual Page 47