Zebra KR403 Specifications download pdf (Page 37)

Controls

Controls, Indicators and Sensors

12/23/2009 KR403 Integrators Guide P1016701-001

Feed Button

The Blue Feed button has several functions:

• Press and Release will feed media, cut, and present a complete receipt page in the default

kiosk mode. All the other integrator set modes and variations of the kiosk mode will at

minimum, feed a page length of media when the Feed button is pressed and released.

• Any data in the print buffer will be printed.

If the buffer is empty the page will be blank.

In black-mark mode, the page will be synchronized with the black-mark.

• Press and Hold with the Printer ON will cause the printer to enter the FEED Button

Modes, a suite of manual setup and configuration operations used typically by the

integrator. See the Feed Button Modes on page 31 for more details.

• Press and Hold while turning the Printer ON will cause the printer to enter a printer to

host communication diagnostic mode for application developers and kiosk integrator

troubleshooting. Firmware update download is also supported by this mode to allow direct

file transfer (like the DOS command line COPY function) to the printer without the use of

custom applications or a KR403 printer driver.

Power Indicator

The Power Indicator is green when the printer has the 24 VDC power applied to the printer.

Status Indicator Descriptions

What the Status Light is Telling You

LED Status and Color Printer Status

OFF OFF (Power Indicator is OFF also)

Solid Green On - Ready

Solid Amber Stopped - Failed Internal Power-up Diagnostics

Flashing Green Transferring Data - Normal Operation

Flashing Red Stopped - Printhead Open, Media Out, Media

Path Error or Cutter Error

Double Flashing Green Paused

Flashing Amber Paused - Printhead Cooling Down

Alternately Flashing Green and Red Needs Service - Memory Error

Flashing Red, Red and Green Needs Service - Printhead or Motor Failure

Flashing Red, Amber, Green Memory Defragmentation

(DO NOT reset or turn off power till finished!)

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 119 120

No comments

Zebra KR403 Specifications Page 37