Zebra KR403 Specifications download pdf (Page 33)

Printer Overview

Basic Media Mounting Considerations

12/23/2009 KR403 Integrators Guide P1016701-001

The areas of primary concern are the horizontal operation’s ‘loop area’ and ‘waste bin’, and

vertical operations ‘receipt presented storage’, ‘waste bin’ and open ‘loop area’ (with no loop).

These two areas can require special attention when designing the inside of the kiosk. The

printer needs the space to store the printed receipt before presenting it to the customer. The

longer the receipt, the greater the area needed. When mounting the printer at angles other than

the nominal vertical or horizontal orientations, simulated receipt printing operations should be

observed with ideally the chosen media for use in the kiosk and in the environmental

conditions that it will operate on-site.

The KR403 mounting becomes even more versatile if the Small Roll Media Roll Adapter

accessory is used to guide the leading edge of receipt into the input of the media drive rollers.

This allows the printer to be mounted in a wider range of mounting orientations shown below

Small Core Media

Roll Adapter

Horizontal

Vertical

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

No comments

Zebra KR403 Specifications Page 33