Summary of Firmware Release
V68.18.0Z
12
P1040502-015 05/09/2013
Issues Corrected
• CPCL: change ON-OUT-OF-PAPER default from PURGE 2 to PURGE 1
• CPCL: Performance degradation with large number of references to CPF fonts
• CPCL: DIR commands incorrectly lists files from the Z: drive
• Firmware update occasionally fails
• Mirror: FTP process very slow running on WS2008 IIS7 FTP v7.5
• Print: Printer feeds ~10 inches after a 2-key (should be 3 inches max)
• SGD: file.type adds double quotes at beginning and end of file data
• ZPL: ^JUA command sets inactivity timeout to incorrect default value
• ZPL: Add ZPL configuration section to 2-key report
• ZPL: printer does not use stored tear-off setting after power up
• ZPL: ^MF command fails to perform media calibration
• ZPL: printer delays 2-3 seconds when format contains a ^JUS
• 802.11: Fails to connect to an AP configured for WEP with shared authentication
• 802.11: Remote auto-connect occurring before power on mirror
File.dir_format SGD Command
A new SGD parameter called file.dir_format has been created. When set to “zpl” the file.dir
command operates as described in the ZPL programming manual. When set to “cpcl” the
file.dir command operates identically to the DIR command described in the CPCL
programming manual. The default value is “zpl”.
Examples
V68.18.0Z
Release Date: 13 January 2012
Enhancements
• Add support for ZPL (see comments below)
• Add support for ZPL command override feature (see comments below)
• Add support for XML input
! U1 setvar "file.dir_format" "cpcl"
! U1 getvar "file.dir_format"
! U1 getvar "file.dir"
Comments to this Manuals