17
Summary of Firmware Release
V68.18.0Z
03/24/2014 P1040502-017
• ZPL: Add ZPL configuration section to 2-key report
• ZPL: printer does not use stored tear-off setting after power up
• ZPL: ^MF command fails to perform media calibration
• ZPL: printer delays 2-3 seconds when format contains a ^JUS
• 802.11: Fails to connect to an AP configured for WEP with shared authentication
• 802.11: Remote auto-connect occurring before power on mirror
File.dir_format SGD Command
A new SGD parameter called file.dir_format has been created. When set to “zpl” the file.dir
command operates as described in the ZPL programming manual. When set to “cpcl” the
file.dir command operates identically to the DIR command described in the CPCL
programming manual. The default value is “zpl”.
Examples
V68.18.0Z
Release Date: 13 January 2012
Enhancements
• Add support for ZPL (see comments below)
• Add support for ZPL command override feature (see comments below)
• Add support for XML input
• Add support for ZBI 2.0 (requires license to enable)
• Reduced printer shutdown time
• Mirror: Add support for fs_image feature
• Mirror: add support for ip.mirror.enable_firmware_update SGD
• SGD: Add support for remote auto-connect via TCP
• SGD: Add support for Secure FTP (SFTP)
• SGD: add capability to save a two-key report to a text file (see comments below)
• SGD: add support for ip.dhcp.cache_ip parameter
• SGD: add ability to restore all defaults (device.restore_defaults with “all” option)
• SGD: optional disablement of battery alerts
• SGD: add support for DHCP Option 12
• LCD: Envelop icon now stays on when the parser is locked to a port expecting more data
• Add ability to parse ZPL commands in config.sys and autoexec.bat files
! U1 setvar "file.dir_format" "cpcl"
! U1 getvar "file.dir_format"
! U1 getvar "file.dir"
Comments to this Manuals