Zebra MZ series Specifications download pdf (Page 13)

MZ Series User Guide

Charging the battery

Refer to Figure 4.

1. Plug the Charger Power Supply into the appropriate A.C.

wall receptacle. Then insert the charge cable into the

printer’s charger jack.

2. The printer’s charger indicator will indicate the status of

the charger as follows:

• An amber light indicates the battery is charging, and that

the battery is less than 90% charged.

• A green light indicates the battery is fully charged. The

battery is ready for use.

Approximate Charge Times :

Batteries are fully charged after 2.5 hours from the low-bat-

tery shut-off state. Partially discharged batteries will take less

time to charge.

NOTES: Use of the printer while charging will increase charge times.

Charge times are for completely discharged batteries.

As a safety feature the battery will stop charging after 4.5

hours regardless of the battery’s charge state.

Charger Jack

12 VDC

Figure 4: Charging the Battery

MZ Series Charger Power Supply p/n AT17947-1

110-240 VAC 50-60 Hz 0.6A Input; 12 VDC 1.25 A output

Plug into AC receptacle

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 52 53

No comments

Zebra MZ series Specifications Page 13