X Command - Bar Width
Description
Use this command to set the "X" dimension (or
narrow bar width) of a bar code.
Syntax
¬Xp
1
Parameters p
1
= Width in dots.
Each dot is 0.125mm or 0.005" wide.
Values: 2, 3 or 4
Default: 2 (.25mm or .010")
The selected value will remain in effect until:
❏
The setting is changed,
❏ An error condition occurs or
❏ The print has power cycled and returns to the
default setting.
Example:
¬X2¿ :sets the bar width to 10 mils.
980353-001 Rev.B 3-37
Comments to this Manuals