Basic Line Mode
Guidelines
The following are basic line mode programming
and operation guidelines.
❏
Printing is from right to left and from top to
bottom.
❏
Sending a simple unformatted text (ASCII
data) to the printer followed by a carriage re
-
turn (CR), line feed (LF) or both (CR/LF)
characters will result with printed text as
typed (or stored as a file) on the media.
❏
A line consisting of only a carriage return
(CR), line feed (LF) or both (CR/LF) charac
-
ters will produce a blank line.
❏ Once set to line mode, the printer will remain
in line mode until changed by the Line
Mode/Page Mode (EPL2) configuration sub-
routine (see page 1-5) or the EPL2 command
(see page 3-15).
❏ Printing graphics does not effect text or bar
code printing (line height) or parameters.
❏ The printer will accept data that exceeds the
right hand margin or media edge and will be
truncated. Note: Printing off the media and
onto the platen may reduce the printer’s op
-
erational life span.
980353-001 Rev.B 2-7
Comments to this Manuals