Zebra 170PAX2 Series User's Guide download pdf (Page 87)

Appendix E

Installation Information

Ventilation openings of the print engine mounting enclosure shall be provided by the

installer to remove heat and ensure uninterrupted, trouble-free operation of the print

engine. Ambient air temperature surrounding the print engine must not exceed 40

degrees Centigrade or 104 degrees Fahrenheit.

When the print engine is mounted, consideration must be given to the stability of the

complete assembly so that when a full roll of media is loaded, the equipment does not

become physically unstable.

Figure 26. Right Side View of Right-Hand Printer

Consideration must be given to the current rating of the print engine during installation

so that when power is applied to the print engine and the enclosing equipment, an over-

load condition is not effected on enclosing equipment circuits or supply wiring.

Reliable grounding of the print engine must be maintained. Particular attention must be

given to the AC power supply connections so that earth ground is maintained through

the AC power input connector.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 99 100

No comments

Zebra 170PAX2 Series User's Guide Page 87