Zebra 170PAX2 Series User's Guide download pdf (Page 65)

100

Print Engine Specifications

Printing Considerations

Print Speeds

172PAX3 (203 DPI) – Programmable constant printing speeds (per second) of 2.4" (61

mm), 3" (76 mm), 4" (102 mm), 5" (127 mm), 6" (152 mm), 7" (178 mm), 8"(203 mm),

9" (229 mm), 10" (254 mm), 11" (279 mm), and 12" (305 mm).

173PAX3 (300 DPI) – Programmable constant printing speeds (per second) of 2.4" (61

mm), 3" (76 mm), 4" (102 mm), 5" (127 mm), 6" (152 mm), 7" (178 mm), and 8" (203

mm).

Media Specifications

Media Type (continuous, die-cut, or

black mark)

172PAX3 173PAX3

Resolution 203 dots per inch

(8 dots per mm)

300 dots per inch

(12 dots per mm)

Dot size 0.0049” x 0.0049”

(0.125 mm x 0.125 mm)

0.0033” x 0.0039”

(0.084 mm x 0.100 mm)

First dot location (from inside media edge) 0.093” ±0.035”

(2.4 mm ±0.89 mm)

0.093” ±0.035”

(2.4 mm ±0.89 mm)

Maximum print width 6.6” (168 mm) 6.6” (168 mm)

Maximum print length (with full width media)

Non-continuous (4 MB Memory)

Non-continuous (12 MB Memory)

Continuous (4 MB Memory)

Continuous (12 MB Memory

39” (990 mm)

92” (2336 mm)

338” (8585 mm)

39” (990 mm)

41” (1041 mm)

150” (3810 mm)

Media width (label and liner) 3” (76 mm) to 7.1” (180 mm)

Minimum label length

Applicator mode

Rewind mode

Tear-off mode

3.0” (76.2 mm); 1.0” (25.4 mm) with backfeed off

1.0” (25.4 mm); no backfeed

3.0” (76.2 mm); 1.0” (25.4 mm) with backfeed off

Media registration tolerance

Vertical (concurrent labels)

Horizontal

±0.040” (±1.0 mm) (in Applicator mode)

±0.040” (±1.0 mm)

Total thickness (including liner) 0.003” to 0.012” (0.076 mm to 0.305 mm)

Interlabel Gap (Transmissive Sensor)

Minimum

Preferred

Maximum

0.079” (2 mm)

0.118” (3 mm)

Refer to “MAXIMUM LENGTH” on page 25 for Interlabel

Gap and Label Length discussion.

Black Mark (Reflective Sensor)

Length (parallel to inside media edge)

Width (perpendicular to inside media edge)

.12” (3 mm) to .43” (11 mm)

>= 0.43” (11 mm)

Print Line to Peel Bar Distance .63” (16 mm)

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 99 100

Comments to this Manuals

No comments

Zebra 170PAX2 Series User's Guide Page 65

Comments to this Manuals

Related products and manuals for Print & Scan Zebra 170PAX2 Series