Zebra 170PAX2 Series User Manual download pdf (Page 6)

Front Panel Programming

Real Time Clock Parameters

47867L-001 Rev. A 05/25/2005

Idle Display

Selects the printer/print engine Idle Display format and the method of displaying the time/date

information. This parameter also affects the Configuration Label printout and the RTC DATE

and RTC TIME formats.

Selections

FW VERSION, MM/DD/YY 24HR, MM/DD/YY 12HR, DD/MM/YY 24HR, DD/MM/YY

12HR

If FW VERSION is selected, the format on the Configuration Label and on the RTC DATE

and RTC TIME parameters is MM/DD/YY 24HR.

RTC Time

Allows entry of the RTC time in the format selected by the IDLE DISPLAY parameter.

Use the LEFT oval key to select the position to be adjusted; then use the RIGHT oval key to

select the correct value for that position.

RTC Date

Allows entry of the RTC date in the format selected by the IDLE DISPLAY parameter.

Use the LEFT oval key to select the position to be adjusted; then use the RIGHT oval key to

select the correct value for that position.

Note • Invalid dates may be entered, but will not be saved. (i.e., 2/29/1999)

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Zebra 170PAX2 Series User Manual Page 6