Zebra KR203 Specifications download pdf (Page 18)

Windows CE Driver

Printer Settings

P1028251-001 Rev. A KR203 Windows CE Software Integrator Guide 3/1/2011

Darkness

The Darkness can be set between 0 and 30 with zero being the lightest. The default

setting is 20.

Max Print Speed

The max print speed can be set between 75 mm and 152 mm per second (mm/s). The

default setting is 152 mm/s. The actual print speed may vary depending on the darkness

and the content printed.

Media Tracking

Media Tracking sets Continuous, Variable Length, or Mark Sensing with the default set to

Variable Length. When media tracking is set to Continuous, the driver sends the full page

size to the printer (Page Mode), the page length will always be the same as the selected

paper size (e.g. if 58mm x 200mm Media is selected, the print will be 200mm long in Page

Mode). When media tracking is set to Variable Length, the driver will shorten the print to

the length of the page. The driver will end the print after the last printed element (text,

barcode, or graphic) then send a feed, cut, and eject command. The page length may vary

from page to page but will always be a minimum of 92mm. When Mark Sensing is set, the

driver will send the page size to the printer, the printer will restrict the print to the area

between the black marks. If the printed area is larger than the space between the black

marks, it will print additional pages (receipts). The margin values in the receipt application

must be corrected after setting the driver values. If the margin in the application is set to

9mm and the driver is set to 2mm, the application setting will be enforced unless the driver

is changed accordingly.

Compression sets whether the data is sent to the printer compressed or uncompressed. If

the data is sent uncompressed, this may result in longer print times.

Figure 2-3 • Darkness set to 20 (default)

Figure 2-4 • Darkness set to 0 (zero)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

No comments

Zebra KR203 Specifications Page 18