Zebra KR203 Specifications download pdf (Page 17)

Windows CE Driver

Printer Settings

3/1/2011 KR203 Windows CE Software Integrator Guide P1028251-001 Rev. A

The following table describes the values and defaults of the parameters:

The OK button will apply the parameter and exit the program.

The Cancel button will not apply the parameter and exit the program.

The Apply button will apply the parameter but not exit the program.

The Default button with set all parameters to factory default.

After the settings application has saved all the parameters these will be used during print

jobs.

The following settings will be sent to the printer during each print job:

Media Width

The media width can be set to 58 mm, 60 mm, 80 mm and 82.5 mm. The default setting is

80 mm

Media Height

The media height can be set between the minimum page length of 100 mm and the

maximum page length of 600 mm. The default setting is 100 mm

Table 2-3 • Parameter Settings and Defaults

Parameter Value Range Default Value

Media Width 58mm, 60mm, 80mm, 82mm 80mm

Media Height 100mm to 600mm 100mm

Darkness 0 to 30 20

Max Print Speed 75mm to 152mm 152mm

Media Tracking Continuous, Variable Length,

Mark Sensing

Variable Length

Top Margin 2mm to 12mm 12mm

Bottom Margin 0 to 9mm 0

Cutter Mode None, Every Page, End of

Document

Every Page

Partial Cut Width 0, 10mm to 60mm 0

Presenter Loop Length 0 to 600mm 400mm

Eject Length 20mm to 600mm 50mm

Present Length Addition 0 to 255mm 0

Presenter Timeout 0 to 300 seconds 0

Clear Presenter Disable, Enable Disable

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

No comments

Zebra KR203 Specifications Page 17