Zebra EPL2 Specifications download pdf (Page 45)

C Command - Counter

Description The counter (C) command defines one of 10

automatic counters used in consecutive num

bering applications (i.e. serial numbers). Coun

ters must be defined after variables.

For Numeric Serialization Only. The counter

function does not support Alpha or Alpha-Numeric

Serialization.

Syntax Cp

, p

, “[-]PROMPT”

Parameters p

=Counter number. Range: 0 to 9

=Maximum number of digits for the counter.

Range: 1 to 29

=Field Justification.

L = Left R = Right

C = Center N = No Justification

=Step Value. + or - sign followed by a

single digit of 1-9. Using a step value of

+0 allows the counter to be used as an

additional variable data field.

“PROMPT”= An ASCII text field that will be

transmitted to the KDU or host (via the

serial interface) each time the command

is executed. Typically used to request the

operator to enter a starting counter value.

KDU Prompt

Options

[-] = Having the first character of the prompt

a single minus sign will cause the

prompt to display only once after form

retrieval.

980352-001 Rev.A

3-27

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 137 138

No comments

Zebra EPL2 Specifications Page 45