Zebra RW 420 User's Guide download pdf (Page 53)

RW Series User Guide

RW 220 Vehicle Cradle

The RW 220 can be used in conjunction with its own docking

Cradle. When the printer is “docked” it can be powered by ei-

ther its own battery or one of the RCLI series of external char-

gers. Refer to the documentation supplied with the Cradle for

more information.

Installing the RW 220 in the Cradle

Refer to Figure 23.

Important • It is recommended as a safety precaution that the

adjustable shoulder strap be removed prior to docking the Printer. This

precaution ensures the strap will not interfere with proper operation of

the vehicle.

• Place the bottom of the printer over the two pins in the

Cradle.

• Rock the top of the Printer into the Cradle and press firm-

ly until it latches in place.

Figure 23: Installing the RW 220 in the Cradle

continued

Place the

Printer over the

retaining pins in

the Cradle.

Rock the Printer into

the Cradle to latch it in

position.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 85 86

No comments

Zebra RW 420 User's Guide Page 53