Zebra PA400 User Manual download pdf (Page 51)

Label Specifications

Memory/Communications Specifications

Label/Tag Width 1” to 4.25” (25.4 mm to 108 mm)

Fanfold Width 3.5” to 4.25” (89 mm to 108 mm)

Label/Tag Length 0.5” to 10” (12.7 mm to 254 mm)

Interlabel Gap

.08” to .16” (.12” preferred)

2 mm to 4 mm (3 mm preferred)

Label/Tag Thickness .0030” to .0106” (.076 mm to .269 mm)

Label Roll

Size

Max. Outer

Diameter

2.1” (53.3 mm)

Inner Core 1” (25.4 mm)

Media Requirements

Use Zebra-brand direct thermal or thermal transfer roll

media that is outside wound. Media may be reflective

(black mark) sensing or transmissive sensing, die-cut,

notched, or continuous.

For die-cut labels, use only full auto dies.

Notched media must have a 0.5” (12.7 mm) wide x 0.094”

(2.4 mm) long cutout located in the center of the roll. The

reflective media black marks must be located in the center

of the roll.

Minimum Black Mark Dimensions:

ü Mark width: 0.5” (12.7 mm) perpendicular to the edge of

the media.

Mark length: 0.094” (2.4 mm) parallel to the edge of the

media.

ROM Memory 8 megabit flash (512 kilobyte x 16 data bit width)

RAM Memory 4 megabit DRAM (256 kilobyte x 16 data bit width)

Communications RS-232 serial port (RJ45 connector)

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58

No comments

Zebra PA400 User Manual Page 51