Zebra 61331M Datasheet download pdf (Page 58)

61335M Main Logic Board Maintenance Kit

Resume Printer Operation

61311L-001 Rev. A HC100 Maintenance Manual 5/8/08

3. Slide the outer enclosure over the print mechanism assembly while pressing the upper

print mechanism release buttons until they are inside the outer enclosure.

4. Slip the left and right upper print mechanism legs inside the edges of the outer enclosure

and ensure that the ground wire is still routed to the rear of the mounting post before it is

seated on the base.

5. Slide the cover down until aligned and seated into the base.

See Figure 21 on page 45. Reinstall the outer trim plate by sliding the back edge in first

and then lowering the front edges until they snap in place.

Resume Printer Operation

1. See Figure 2 on page 2. To close the upper cover, rock the front edge down, push the cover

toward the back of the printer, and then push the cover down.

2. Reinstall the data cables and DC power cord.

3. Turn on (l) the printer.

4. Insert the media cartridge into the printer.

Caution • When inserting self-threading screws, be careful to avoid cross-threading or

stripping the plastic holes.

Reinstall the two mounting screws.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 79 80

No comments

Zebra 61331M Datasheet Page 58