SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE P/N 14203L REV. 1 June, 2008
Firmware
ZPL II – Universal language for Zebra printers. Simplifies
label formatting and enables format compatibility with existing
systems that run Zebra printers.
• Web View –Connect and control Zebra bar code
printers via the printer’s Web interface using a
common Web browser.
• Alert – Printers equipped with ZebraNet print servers
provide alerts via any email-enabled, wired, or wireless
device to minimize downtime.
XML-Enabled printing –direct connect integration for bar
code label printing, eliminates license fees and printer server
hardware and lowers customization and programming costs. .
Printing Specifications
• 203 dpi resolution (8 dots/mm)
- Dot size (W x L):
0.0049" x 0.0049" (0.125mm x 0.125mm)
• 300 dpi resolution (12 dots/mm)
- Dot size (W x L):
0.0033" x 0.0039" (0.084mm x 0.099mm)
• First dot location measured from inside media backing
edge:
0.10" ±.04" (2.5mm ± 1mm)
• Maximum print width: 6.6" (168mm)
• Maximum continuous media print length:
203 dpi 300 dpi
102"
2590mm
45”
1143mm
• Media registration tolerance:
- Vertical = <
±0.039" (±1.0mm) on non-continuous
media - --- Horizontal = <
±0.039" (±1.0mm) within a roll
Programmable print speeds:
- 203 dpi = 2.4" (61mm), 3” (76mm) through 10"
(254mm) per second in 1" increments
- 300 dpi = 2.4" (61mm), 3” (76mm) through 8" (203mm)
per second in 1" increments
Media Specifications
• Maximum non-continuous label length: 39" (991mm)
• Media type: continuous, die-cut, tags, black-mark
• Media web width (label and liner):
2.0" (51mm) to 7.0" (178mm) Tear / Cutter
2.0” (51mm) to 6.75” (171mm) Peel / Rewind
• Minimum label length:
- 0.5" (12.7mm) in Tear, Peel and Rewind Mode
- 1.0" (25.4mm) in Cutter Mode
• Media thickness (label and liner):
0.0023" (0.058mm) to 0.010" (0.25mm)
• Maximum media roll size:
8.0" (203mm) O.D. on a 3" (76mm) I.D. core
• Maximum fan-fold pack size:
8.0"L (203mm) x 7.0"W (178mm) x 6.2"H (157mm)
• Gap and notch sensing standards:
- Inter-label gap: 2 - 4mm, preferably 3mm
- Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)
- Sensing hole: 0.125" (3mm) diameter
* Note:
Notch & Hole Position centered from 0.15” to
3.5” from media inner edge
• Black mark sensing standards:
- Black mark length (parallel to inside media edge):
0.098" - 0.453" (2.5mm - 11.5mm)
- Black mark width (perpendicular to inside media edge):
>
0.37" (> 9.5mm)
- Black mark location: within 0.040" (1mm) of inside
media edge
- Black mark density: > 1.0 Optical Density Units (ODU)
- Maximum media density: 0.5 ODU
Ribbon Specifications
• Ribbon width: 2.00" (51mm) to 6.85" (174mm)
• Standard Lengths: 984' (300m) or 1476' (450m)
• Maximum ribbon roll size:
3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core
• Ribbon wound ink-side out.
Comments to this Manuals