Zebra 160S User's Guide download pdf (Page 63)

To minimize electrical noise pickup in the cable:

•

Keep data cables as short as possible.

•

Do not bundle the data cables tightly with power cords.

•

Do not tie data cables to power wire conduits.

Interconnect to DTE Devices

The printer is configured as Data

Terminal Equipment (DTE). To

connect the printer to other DTE de-

vices (such as the serial port of a

PC), use an RS-232 Null Modem

(crossover) cable. Figure 5.2 illus-

trates the connections required for

this cable.

Interconnect to DCE Devices

When the printer is connected via its

RS-232 interface to Data Communi-

cation Equipment (DCE) such as a

modem, use a standard RS-232

(straight-through) interface cable.

Figure 5.3 illustrates the connections

required for this cable.

5-4 Zebra S-Series User’s Guide

Figure 5.2 DTE to DTE Connections

Figure 5.3 DCE to DTE Connections

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 105 106

No comments

Zebra 160S User's Guide Page 63