Zebra MC75 User's Guide download pdf (Page 115)

Using the Phone 5 - 7

2. From the Phone keypad, tap and hold the speed dial location number assigned to a contact. (To dial a one-digit

speed dial location number, tap and hold the speed dial number. To dial a two-digit speed dial location number,

tap the first digit and then tap and hold the second digit.)

From the Phone keypad, tap Speed Dial and tap the speed dial location number of the desired contact in the

list.

Figure 5-9

Speed Dial Contact List

3. To stop dialing or end the call, tap End or press the red phone key on the MC75 keypad.

Making an Emergency Call

Your service provider programs one or more emergency phone numbers, such as 911 or 999, that you can call

under any circumstances, even when your phone is locked or the SIM card is not inserted (on MC7506/96). Your

service provider can program additional emergency numbers into your SIM card. However, your SIM card must be

inserted in your phone in order to use the numbers stored on it. See your service provider for additional

information. See Installing the SIM Card on page 1-4 for SIM card installation procedures.

When the alpha-numeric keypad phone is locked, press the Orange key twice to set the keypad to numeric mode

and then enter the emergency number.

Answering a Call

A dialog box appears on the MC75 when it receives an incoming call. If the phone is set to ring, a ring tone sounds.

Answer or ignore the incoming call.

To answer an incoming call tap Answer on the Phone - Incoming dialog or press the green phone key on the

MC75 keypad.

Speed Dial

Location Number

NOTE Emergency numbers vary by country. Your phone’s pre-programmed emergency number(s) may not work in

all locations, and sometimes an emergency call cannot be placed due to network, environmental, or

interference issues.

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 201 202

No comments

Zebra MC75 User's Guide Page 115