Zebra RS419 Manual Page 1

RS419RING SCANNERQUICK REFERENCE GUIDE

CleaningApproved Cleanser Active Ingredients100% of the active ingredients in any cleaner must consist of one or some combination of the following: is

Cleaning InstructionsDo not apply liquid directly to the RS419. Dampen a soft cloth or use pre-moistened wipes. Do not wrap the device in the cloth or

Cleaning the RS419HousingUsing the alcohol wipes, wipe the housing.Exit WindowWipe the scanner exit window periodically with a lens tissue or other ma

7. Spray compressed air on the connector area by pointing the tube/nozzle about ½ inch away from the surface.8. Inspect the area for any grease or di

TroubleshootingSymptom Probable Cause ActionLaser beam does not display when pressing the trigger.Interface cable is not secure. Verify that the inter

Ergonomic Recommendations• Reduce or eliminate repetitive motion• Maintain a natural position• Reduce or eliminate excessive force• Keep objects that

• Provide adequate clearance• Provide a suitable working environment• Improve work procedures.Regulatory InformationThis device is approved under the

Laser DevicesComplies with 21CFR1040.10 AND 1040.11 except for deviations pursuant to Laser Notice NO. 50, dated June 24, 2007 and IEC 60825-1 (Ed. 2.

Radio Frequency Interference Requirements-FCCNote: This equipment has been tested and found to comply with the limits for a Class B digital device, pu

Marking and European Economic Area (EEA)Statement of ComplianceMotorola/Symbol, hereby, declares that this device is in compliance with all the applic

Motorola Solutions reserves the right to make changes to any product to improve reliability, function, or design.Motorola Solutions does not assume an

Taiwan StatementR32626᪯⏗᝹ឬེဳภ  RS419ა⷏ຮ೙ㅧWaste Electrical and Electronic Equipment(WEEE)English: For EU Customers: All products at the end of their l

Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Motorola zurückgesandt werden. Informationen zur

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Motorola za reciklažo. Za informacije o vraèilu izdelka obi

Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir jānogādā atpakaļ Motorola otrreizējai pārstrādei. Lai iegūtu informāciju par pr

Motorola Solutions, Inc.1301 E. Algonquin Rd.Schaumburg, IL 60196-1078, U.S.A.http://www.motorolasolutions.comMOTOROLA, MOTO, MOTOROLA SOLUTIONS and t

IntroductionThe RS419 ring scanner is a modular, wearable laser scanner that allows the operator hands-free bar code scanning capability. The scanner

Changing Trigger PositionThe trigger assembly of the RS419 rotates to provide left-hand or right-hand use.1. Determine whether the RS419 is used on th

3. Slide the RS419 onto the index finger with the scan trigger next to the thumb.4. Tighten the finger strap.ScannerCableConnectorInterface Connector

5. If required, cut excess finger strap material.6. Warm boot the wearable terminal.Using the ScannerNot to be used in condensing environments.To scan

5. If the decode is successful the LED turns green. The terminal beeps if programed accordingly.Scanning Tips• For larger bar codes, hold the RS419 fa

2. Slide the finger strap assembly out of the trigger assembly.3. Align a new finger strap assembly with the slot in the trigger assembly.4. Push the

Replacing the Trigger AssemblyTo replace the trigger assembly:1. Remove the finger strap assembly.2. Turn the RS419 upside-down.3. Remove the set scre